Monday, 8 February 2016

SMOK Guardian Epipe Mod II

SMOK Guardian Epipe Mod II is luxurious, comfortable to hold variable wattage e-pipe mod made of real wood and stainless steel.
The wattage can be adjusted from 6w-15w using a Magnet Switch button that has a spring loaded conductive structure for stable performance. However, the mod automatically match the atomizer resistance to create best vaping experience for you if you just connect the tank and start vaping.
There is a LED light on top of the mod and when it shows White it indicates 6w to 10w output wattage and when it shows Blue it indicates 11w to 15w output wattage.
  • Operating wattage is 6.0 to 15.0 watts
    Minimum resistance 1.0 ohm
    510 eGo threading
    Made out of real wood and stainless steel
    Utilizes one 18350 battery removable and sold separately

Main Features:
Variable Wattage:
Wattage can be adjusted from 6.0 – 15.0 Watts in 1.0watts increments.
Constant Wattage Output:
White LED - Wattage adjustable from 6W to 10W
Blue LED - Wattage adjustable from 11W to 15W
Unlock/Lock Feature:
Quickly clicking five times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
On/Off by pressing the power button 5 times in a row within 2 seconds. Status changed confirmed when the white LED flashes 3 times

LED Battery Indicator:
When the battery voltage is lower than 3.3V, the white LED Flashes 15 times to remind of you charging the battery.
8-Seconds Cutoff:
If the button is held down for 8 seconds or longer, the LED will flash and shut off until the button is released

Wednesday, 3 February 2016

Original Joyetech EVic Mini Express Kit

This original Joyetech eVic VTC Mini VW Full kit is an innovative, and the most mature temperature control MOD, both VT and VW functions available. With three modes applied - VT-Ti (titanium), VT-Ni (Nickel 200) and VW modes - it brings new experience of VT control, a new flavor with every change of temperature setting. Besides, battery performance is prolonged at the same time. In a word, this e-cig kit will bring you a great vaporing experience.

Main Features:
Stainless steel MOD
Three output mode: VT-Ti / VT-Ni / VW mode
Output wattage: 1 - 60W
Resistance range: 0.05 - 1.0ohm for VT mode, 0.15 - 3.5ohm for VW mode
Temperature range: 100 - 315 centigrade degree / 200 - 600 Fahrenheit degree
Supporting pure Nickel (Ni200, made in USA) and pure Titanium wire, and 100% organic cotton
With changeable battery and magnetic cover
Saving battery and liquid consumption without a dry hit
Enhancing flavor experience with the change of temperature settings by displaying in the OLED screen
Joyetech eGo ONE Mega atomizer - 3ml (0.2ohm Ni pre-installed) 
Atomizer resistance: 0.2ohm
Atomizer capacity: 3ml
510 thread
Comes with an extra 0.4ohm Ti wire atomizer head
Stainless steel material

Specifications:
Type: E Cigs kit 
Brand: Joyetech 
Model : Joyetech EVic VTC Mini VW Express Kit 
Available Color : Black, White, Blue 
Feature: VTC / VW 
Material : Stainless steel 
Thread Type: 510 
Style : Rechargeable 
Atomizer Type: Clearomizer 
Atomizer Resistance: 0.2ohm 
Atomizer Capacity: 3.0ml 
Mod Type: Temperature Control Mod, VV/VW Mod 
APV Mod Wattage: 60W 
Battery Cover Type: Magnetic 
Charge way : USB

Wednesday, 27 January 2016

SMOKTECH TREEBOX 75W TC ZEBRADWOOD BOX MOD

Switching styles but not performance SMOK have finally introduced to the market this month their first wooden box mod called the TREEBOX Mini.
Handcrafted from luxury Brazilian zebra wood that is both smooth to the touch and very durable for long-lasting pleasure. Weighing in at only 80g the TREEBOX Mini is an extremely eye catching 75w TC device that includes all the latest technological refinements that SMOK have engineered to improve safety, performance and reliability especially in the popular TC mode of operation.
Featuring adjustable Initial resistance technology with heat coefficient control built in to further enhance your vaping experience, along with all the other safety features we have come to expect from SMOK, this latest device should fit nicely into an ever increasing family of high-quality products that never seems to stop improving.

Packaging
The TREEBOX Mini comes in an equally impressive sealed ornate wooden box. On top of the box is the SMOK logo in silver. The lower front section has a scratch to reveal authentication label attached, and the base houses a product description along with bar codes, and age verification 18+. This can be removed to reveal a felt layer underneath it.
Inside on the top level is the TREEBOX itself. By removing it and the foam layer that it is seated in you will find additional information in relation to battery safety, cleaning the TREEBOX, a Warranty card, plus the user manual in English and Chinese.

Specification
Material: Zebrawood
Size : 92 x 40 x 28 mm
Weight: 80g
Output Power : 1w – 75w
Output Voltage : 0.80V – 9.00V
Standby Current: < 20 micro A
Working Current: Min:1A Normal:10A Maximum 30A
Resistance TC mode : 0.06Ω- 2.00Ω
Resistance Wattage Mode : 0.10Ω – 3.00Ω

Thursday, 7 January 2016

Joyetech Cub

Joyetech has manufactures one of the best atomizer known as Cuboid it is first time introduced with firmware V3.0 and 150W output which are capable of changing device temperature control system and customized TCR with Temp-SS316.
The device is heavy duty in functionality and need to powered by 18650 power two batteries. With the new stunning slid-able cover it is easier to change the batteries.
The multi colored OLED screen makes It is more convenient to use, which displays status of both batteries at a time and also displays atomizer resistance changes in every nano seconds.
Cuboid firmware is always upgrade able and remain up to date. Now it can be upgrade to 200w through VT software.
Features:
1. It utilizes five working modes known as VT-Ti, VT-Ni, VT-SS316, TCR, and VW
2. The Wattage range 1 to 150 watts for output
3. Range of temperature is adjustable which is 100-315℃ or 200-600°F
4. It allows 0.05 to 1.5 ohm resistance for VT mode while 0.1 to 3.5 ohm for VW mode
5. It consists of 0.91 inch OLED screen to show all parameters
6. Two batteries with a power 18650 are Compatible with it  (separately sold)
7. Featured Reverse polarity protection
8. To change batteries it has slide able back cover 
9. Spring loaded stainless steel 510 threaded
10. From 1 to 1000 TCR can be customized
11. Firmware remain up to date
Note:
To keep Cuboid updated customer can download upgrading firmware via VT software. With firmware V3.10 now it can be upgraded to 200W.
Each set contains:
1 x Joyetecg Mod TC 150W
1 x Micro port USB cable
1 x User Manual
1 x Warranty card for one year Claim

Tuesday, 15 December 2015

SMOKTECH GUARDIAN EPIPE MOD II

Equitin Introducing one pf the best Epipe Mod II mod by Smok which is classical, luxurious, comfortable to hold and operate variable wattage E-pipe mod made of real wood and stainless steel construction. The Guardian II is a modern take on a classic timeless form factor the traditional premium wooden pipe. The wattage on the Guardian II can be adjusted from 6w-15w using a Magnet Switch button that has a spring loaded conductive structure for stable performance. However, the mod automatically match the atomizer resistance to create best vaping experience for you if you just connect the tank and start vaping. The guardian II also flash a light on top of the mod indicating a white light when 6w to 10w output while showing Blue when the output reaches 11w to 15w wattage.  If your looking for a classic feel and appearance while also having all the modern bells and whistles of a cutting edge modern mod vaporizer than look no further than the Guardian II.


Main Features:
Variable Wattage:
Wattage can be adjusted from 6.0 – 15.0 Watts in 1.0watts increments.

Constant Wattage Output:
White LED - Wattage adjustable from 6W to 10W
Blue LED - Wattage adjustable from 11W to 15W

Operating Wattage: 6.0W-15.0W
Minimum Resistance: 1.0 ohm
510/Ego Threaded
Made out of real wood and stainless steel
Utilizes one 18350 battery (removable and sold separately)


Unlock/Lock Feature:
Quickly clicking five times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it's in your pocket or bag, as well as inadvertent settings changes.
On/Off by pressing the power button 5 times in a row within 2 seconds. Status changed confirmed when the white LED flashes 3 times

LED Battery Indicator:
When the battery voltage is lower than 3.3V, the white LED Flashes 15 times to remind of you charging the battery.

8-Seconds Cutoff:
If the button is held down for 8 seconds or longer, the LED will flash and shut off until the button is released

Package Contents:
1 x Guardian E-pipe II
1 x Beauty ring
1 x Manual

Monday, 14 December 2015

Dreadnaut Mechanical Mod 26650 Dripper Hybrid Vape

The Dreadnaut Hybrid clone is a big, beautiful full mechanical mod from Rulien.
Made from high grade stainless steel and brass gives it it’s unique and stunning looks.
The Dreadnaut is a heavy strong and robust device that is also a hybrid and so has it’s own built in rebuildable dripper with a huge juice well.
Features:
  • Tri pole 500 diameter pole
  • 2.5/7mm X2 AFC
  • Deep juice well
  • All Stainless steel and brass construction
  • Polished finish
  • Threaded top cap
  • Soft firing button
  • Silver plated contact pins
  • 34mm diameter
  • 38mm Base diameter
  • 3.7mm upper cap thickness
  • 1.5mm brass outer tube thickness
  • Weight: 520g (without battery)
  • Engraved logo
  • Unique Serial number
This mod is a real head turner and will certainly be a topic of conversation wherever it goes. Recommended for the experienced user.

Friday, 11 December 2015

SmokTech TreeBox Mod

Treebox is known as real Zebra wood box mod, it has extra ordinary Artisanship as feature for the whole body. It has too much natural beauty with all natural factors like color, surface, and material.The texture on the device “TREEBOX” is written by debbosing texture which is fully natural no font, ink and anything included in font. This wooden box is vantage look but it is according to the modern time and trend at same time.
With the appearance and best performance it has a great demand in market as compare to any other mod box.
Treebox mod has ability to fire atomizer with resistance down to 0.06 ohm and it supplies 75 watts and some times upto it with these specs. It drives high quality frequency due to dual drive output mode is integrated extra ordinary. It can monitor resistance and has high quality dynamic frequency technology. With a frequency of 4000 times per second approx it can measure the atomizer resistance which is equal to 250 microseconds. Treebox also introduced accurate coil heating temperature regulatory system.
The center pin is made self adjusting of atomizer according to the use consumption and need. The battery with a power 1650 can power it and can be change later if needed. When replacing battery no need to unscrew back cover just slide in and slide out the magnet cover over battery.


Special Features:
Variable voltage from 0.8V to 9V and variable wattage from 1W to 75W
0.06 to 2.00 is the resistance range of TC mode
0.10 to 3.00 is the range of resistance for VW mode
Width is 40mm, height is 9mm, and depth is 28mm as a dimension
Variation in temperature about 200°F-600°F/ 100°C-315°C
Spring loaded center pin
Stainless steel 510 threading
Magnet back cover with slight able functionality
Replaceable battery with a power 18650
Micro USB port cable for upgrade not for charging
Large OLED screen to display resistance, voltage, and wattage